asperities

英 [æsˈpɛrɪtiz]

美 [əˈspɛrɪtiz]

n.  (尤指语言、态度)粗暴，严厉
asperity的复数

双语例句

• If the gouge layer is thin, contact between asperities on the rock surfaces can occur.
  如果充填物层很薄，两个岩石表面上的凸起物就有可能互相接触。
• But the countries of the continent for a long time desperately struggled against all change, and would have diverted revolution by softening the asperities of absolute government.
  然而大陆各国长期以来拼命反抗一切改革，他们希望通过缓和专制政府的粗暴程度改变革命的方向。
• It is noted that there is a thin fluid film between the loaded asperities and the wafer being polished in CMP process, thereby a flow system with nano scale film is formed in.
  在简述化学机械抛光技术的基础上，提出化学机械抛光过程中，受载的粗糙峰和被抛光的晶片表面之间存在一纳米量级的薄流体膜，形成了纳米级薄膜流动系统。
• In microscope scale, a rough surface can be regarded as a series of asperities with certain stochastic distributions of asperity height, size and geometry.
  从微观角度来看，粗糙表面可以近似地认为是由一系列高度、大小以及几何形状服从一定分布规律的微型粗糙峰所组成，因此粗糙峰之间的接触问题也就成为研究粗糙表面接触问题的关键。
• Agglomerates of delusterant particles located near the surface of sythetic fibers cause asperities.
  消光剂颗粒集结在合成纤维表面附近，导致表面粗糙。
• The preparation and nucleation of a strong earthquake involve fracturing of asperities on the fault plane, and the foreshock activity, the dynamic rupture process and the precursors of the strong earthquake depend on the scale, the strength and the number of asperities.
  强震孕育过程中包含着凹凸体的破裂，断层面上凹凸体的尺度、强度及数量决定着前震活动的特征、强震动态破裂过程以及前兆现象。
• The influence of density distribution and height of the asperities on nonlocal friction is also studied here. A experimental system for friction test is designed.
  分析了微凸体分布密度不同、微凸体高度不同时，非局部摩擦的影响变化规律。
• The larger the surface roughness and the sharper the asperities, the greater the asperity contact load.
  表面越粗糙、表面凸峰越尖锐，微峰接触载荷则越大。
• The experiments indicated that asperities of roll surface plow and stick to the aluminum strip surface, and lubrication oil film in deformation zone shields surface topography of aluminum strip are the primary reasons of surface damage of cold rolled aluminum strip.
  实验发现：轧辊表面微凸体对铝板表面的犁削与粘结作用，以及变形区内润滑油膜对铝板表面形貌的屏蔽作用是冷轧铝板表面损伤的主要原因。
• Based on the interaction of asperities and upper-bound approach a mathematical model for simulation of friction phenomenon between dies and workpiece was proposed.
  本文中以刚性微凸体与可变形微凸体的相互作用模拟金属压力加工过程中模具与工件之间的摩擦过程，并用上限法分析所提出的模型。